[Structural Institute]

JunPeng, Pei-Zhi Zhao, Shan Wang, SiongWee Lee, Shao-Bo Kang.Interface Shear Transfer in Reinforced Engineered Cementitious Composites under Push-Off Loads.Engineering Structures, 2019, 110013

Keywords:Engineered cementitious composites; Push-off test; Interfaceshear transfer;Design method; Load-slip curves; Steel stirrups; Transverse dilatancy

High Lights:

The peak and residual shear stresses of reinforced ECC were determined through push-off tests.

The interface shear transfer mechanisms of reinforced ECC were studied based on the measured strain of stirrups and transverse dilatancy.

A design method was proposed in accordance with test data, which considered the contributions of ECC and stirrups.

Abstract:

Engineered cementitious composites (ECC) has been widely used for structural members and joints under various loading conditions. Nevertheless, the shear transfer mechanism at the interface of reinforced ECC needs further study due to the lack of experimental results. This paper investigates the interface shear transfer of reinforced ECC subjected to push-off loads. Experimental tests were carried out to quantify the shear resistance and to investigate the shear transfer mechanisms at different loading stages. The effects of ratio and type of stirrups were considered in the experimental programme. The peak and residual shear resistances of reinforced ECC were obtained and compared with the calculated values from existing design methods. The interface shear transfer mechanisms were determined by analysing the measured strains of stirrups and transversedilatancy. A design equation was proposed based on experimental results. Finally, conclusions were drawn for the interface shear design of reinforced ECC.

Resource：https://www.sciencedirect.com/science/article/pii/S0141029619315810